Manual micromanipulators
Motor-driven micromanipulators
Piezo electronic micromanipulators


 MM33-series

  A reason for its popularity is ergonomics; the user-
  friendly operating knobs for all three axes are aligned
  in one plane so that ¡°blindfold¡± operation of the MM33
  is possible within the shortest of times.
  Moreover, the operating elements are not at the side,
  but at the back, so that other pieces of equipment can
  easily be installed next to it.


 Products
 MM33 right with clamp 1/2"
 MM33 left with clamp 1/2"
 MM33 right with tilting device
 MM33 left with tilting device

 MMJ-Series

  The micromanipulator MMJ has knobs for
  coarse and fine adjustment for X-, Y-, and Z-
  axes, as well as a mechanical joystick for X-
  and Y-axes that makes ¥ìm-range motion
  possible.
  The Z-axis displacement (ratio 10:1)allows
  for precise positioning, as well as rapid tool
  changing.

.




 HS-6

  The micromanipulator HS6 distinguishes itself by
  its exceptionally solid construction. It finds use
  where utmost precision is crucial.
  There is a manual version with three axes, as well
  as a one (upon special request only), two, or three
  axes motorized model with stepper motors.
  The excursion is 25 mm in all three axes.





 Products
 HS6

 SM-Series

 The micromanipulators of the SM-series are equipped
 with stepper motors that in conjunction with the MCL
 control electronics makes smallest steps of down to
 0,01 ¥ìm possible.
 These minute single steps allow for vibration- and
 back-lash-free operation.
 The very compact construction of the SM 3.25 makes
 its mounting onto the stage plate of a microscope
 practicable.




 Products
 SM3.25  3 axes motorized